1. print icon 印刷

HEB250 High Efficiency Brake

  • Small compact size
  • Through bores and keyways
  • Inch and metric bores
  • Optional mounting adapter
  • High torque output
  • High heat dissipation
  • Longer pad life
  • Bi-directional cooling
  • Optional integrated proximity sensor

The MAGPOWR HEB250 pneumatic tension control brake packs many powerful features into a compact design. Ideal for the demands of general converting and corrugating operations, the HEB produces higher torque at cooler brake pad temperatures. These cooler temperatures along with a thicker brake pad will ensure longer pad life to minimize downtime.

The HEB is engineered for rugged environments, utilizing a single, ventilated cast iron rotor with a bi-directional flute design which allows for efficient cooling when used in either direction of rotation, a through bore and keyway design for easy mounting of the rotor to the brake shaft and an integrated set of caliper mounting brackets that can be mounted directly to the machine frame. These caliper mounting brackets are also an integral part of the safety guarding along with the caliper bodies to reduce the overall size of the brake.

Web tension is accurately controlled by adjusting air pressure to the calipers, pushing brake pads against each side of the rotor to produce consistent brake torque.


  • 气候等级3K3 (EN60721)
  • 污染等级2 (IEC664-1)
  • 振幅0 to 2,000 meters
  • 安装类型Through bore and keyway
  • 最大转速RPM2,000 RPM
  • 摩擦垫摩擦系数Low: 0.12
    Medium: 0.41
    High: 0.51
  • 最大压力621 kPa
  • 最小驱动压力21 kPa
  • 工作温度0 to 50˚ C
  • 仓储温度-30 to 80˚ C
  • 护罩IP20 (IEC529)
  • 风扇要求
  • 电压24 VDC
  • 电流1.5 ADC
  • 接近开关要求
  • 电源电压24 VDC
  • 信号输出NPN N.O.
  • 最大信号电流200 mADC
  • 最大频率2 kHz
    One Pulse per Revolution

Brake pads do not contain asbestos


HEB Brake Installation

The HEB Brake comes partially pre-assembled according to your application. In this 5-minute video, Mike Hemphill shows final installation.